Intraoral Digital Radiography: Elements of Effective Imaging

Robert A. Cederberg, MA, DDS

October 2012 Issue - Expires October 31st, 2015

Compendium of Continuing Education in Dentistry

Abstract

Intraoral digital imaging has evolved from an experimental and sometimes disparaged technique in the mid 1980s to a reliable and ubiquitously used technology today. There are many advantages for use of digital radiographic techniques in dentistry, one of the chief ones being patient dose reduction. However, as important as dose reduction is for safe and effective radiography, practicing dentists would also like to understand the fundamental differences between digital system configurations so they may be able to make an informed choice as to which system best fits their needs. In addition, there has been considerable debate on the following topics: sensor technology; factors associated with image display; optimum techniques for image manipulation; and image storage, retrieval, and archiving. This article provides insight into these and other elements of effective imaging in intraoral digital imaging.

You must be signed in to read the rest of this article.

Login Sign Up

Registration on CDEWorld is free. You may also login to CDEWorld with your DentalAegis.com account.

Despite significant advances in new diagnostic techniques that use no ionizing radiation, intraoral radiographic technique in dentistry is still the most commonly used method for detecting pathology associated with dental disease. The use of conventional dental x-ray film is continuing to decline worldwide, and the number of dentists using digital radiography is increasing. Digital intraoral techniques in dentistry have now been available for more than 25 years, and the choice of two different types of system configurations still exists today.

Digital Intraoral Radiographic System Configurations

The solid-state CCD (charge-couple device) or CMOS complementary metal oxide semiconductor) sensor and the photo-stimulable storage phosphor (PSP) plate are still the two basic configurations that continue to be widely used for dental x-ray examinations. Individual dentists must decide upon the system configuration that best fits their practice or clinic setting; the decision may be based upon sensor parameters, image capture and display times, spatial resolution, and practice workflow, to name just a few of the considerations.

The advantages of digital radiographic over conventional film-based techniques have been well documented.1,2 Patient radiation dose reduction; immediate or faster image production; interactive image display; image security; and image storage, retrieval, and archiving are all noted advantages for digital over film radiography. It has been suggested that integration of digital radiography into the dental practice can take four different routes: completely film-based, hybrid of film and digital, completely digital without integration into an electronic health record (EHR), or completely digital with integration into the EHR.1 Once the level of integration is determined, the dentist must next decide on the system configuration or combination of systems that best meets the needs of the office or clinic.

CCD and CMOS systems provide a direct connection to thecomputer via a cord that allows for image viewing within seconds. However, the presence of the cord and the thickness of sensor/cord interface may complicate positioning of the sensor and could prohibit optimal sensor placement.3 Digital sensors are rigid, their corners cannot be bent, and placement may create some patient discomfort. In one study, all digital sensors were u comfortable for patients during imaging as compared to dental x-ray film.4 In a similar study of bitewing examinations, only 76% of the patients reported that the CCD sensor felt more u comfortable than film.5 Therefore, it may be possible that patient comfort during digital radiographic examinations is likely more dependent on operator technique than the physical contours of the sensor itself.

A second choice for sensor and system configuration is the photostimulable storage phosphor (PSP) plate. PSP system sensors are thinner and more flexible than the hardwired CCD or CMOS sensors, and in some cases, may be more comfortable for the patient when positioned in the mouth. However, plates require an extra processing step to acquire the image, which takes a few extra seconds; but these systems have the advantage of potentially needing only one scanner to service multiple operatories. PSP systems also have a wider exposure latitude or “dynamic range” than do the CCD or CMOS sensors, which means that over- or under-exposing images is less likely with PSP systems, thus often requiring fewer retakes. PSP plates are significantly less expensive than the solid-state sensors (CCD or CMOS), but plates can be damaged with repeated use and must be discarded when scratching or surface degradation leads to image disfiguration. At least one study determined that in a moderately sized dental school clinic, PSP plates needed to be replaced after approximately 50 uses due to scratches and surface irregularities.6

Choice of sensor and/or system configuration for a dental practice or clinic depends on many factors, but some key elements include: a determination of workflow needs, budget, and preferences. Every practice or clinic has a different radiographic workflow, a different mixture of experienced dentists and staff, and varying budgetary needs, as well as a preference for a particular system or systems. Each practice or clinic must weigh all of the aspects associated with radiographic services, decide which ones are critical for success, and make a selection of a system or systems that will satisfy the need.

Caries Detection with Digital Systems

Spatial resolution—ie, the ability of the eye to distinguish fine detail in an image—is a factor often discussed when considering the image quality of dental x-ray film versus any digital system. Resolution is recorded and presented in line pairs per millimeter (lp/mm). Film provides more than 20 lp/mm, but digital systems average anywhere from 7 lp/mm up to a theoretical average of 25 lp/mm, depending on the size of pixels in the image. However, the ultimate limiting factor for any imaging modality—film or digital—is the human eye. The eye without the aid of magnification is restricted to a spatial resolution that is equivalent to approximately 6 lp/mm. Numerous studies have been done to validate the presence or absence of a carious lesion using many different digital systems, and the majority of digital receptors demonstrated diagnostic accuracy equivalent to film, with only a few exceptions.7

The most challenging carious lesion to accurately diagnose is the carious lesion of the outer approximal enamel or the incipient proximal carious lesion. Numerous studies have examined the efficacy of digital radiography for the detection of proximal caries in enamel. Among recent articles comparing x-ray film and digital techniques for the detection of proximal carious lesions of enamel, none found any significant differences in the ability of the observer to detect approximal carious lesions.8-11 These findings agree with many previous studies of artificial and natural carious lesions of enamel that found no significant differences between film and digital systems.

System and software enhancements have been promoted by digital systems manufacturers as being necessary features of digital systems to provide the dentist with the tools to adequately diagnose pathoses, including caries detection. Wenzel7 reported that image enhancement functions do not seem to influence diagnostic accuracy, and features such as inversion, filters, and pseudocolors may be more or less superfluous for the detection of carious lesions. One study compared both standard and high-resolution CCD and PSP images that were both magnified and unmagnified and found that there was no significant difference in their detection of proximal caries.12 Based upon many studies comparing film to various digital systems, as well as studies comparing different digital sensors and digital system features, it can be concluded that, regardless of the radiographic imaging modality used, the dentist should find no difference in his or her ability to detect the proximal carious lesion.

Finally, the use of digital technique does hold a potential promise of providing a “leg up” over x-ray film for the detection of caries. While x-ray film provides only an unchangeable static image, a digital image offers the potential for further analysis. Commercially availablecomputer-assisted diagnostic software programs are available to aid the dentist in the diagnosis of carious lesions. One study evaluated the efficacy of acomputer-assisted program to aid in the diagnosis of caries using as observers seven inexperienced dentists, who evaluated 50 extracted teeth.13 Considering all of the teeth observed—each with a varying lesion size—there was no significant difference when using thecomputer-assisted software compared to observations without the software; however, when looking strictly at lesions confined to the inner half of enamel or into dentin, detection ability was significantly increased.13 Rather than further refinements to existing CCD-, CMOS-, or PSP-based systems, the potential for the development ofcomputer-assisted diagnostic aides for the practicing dentist is likely.

Factors Associated with Image Display

In addition to questions regarding the efficacy of digital systems to acquire the image in a manner suitable for adequate diagnosis of pathology, the manner in which the image is displayed and the conditions under which images are viewed have also been questioned. Medical imaging has long been a proponent of high-end high-resolution monitors, especially for viewing images where soft-tissue display is critical, such as mammography. Medical imaging has established standards for display function to ensure the consistent presentation of the image with the optimum contrast and to match this display as closely as possible to the contrast sensitivity of the human eye.14 The author suspected that monitor quality might be an issue in dentistry as well, so a study was designed to examine observer performance in the recognition of incipient artificial lesions of enamel when viewed on standardcomputer monitors versus high-resolution medical-grade monitors.15 Theoretically, monitors with smaller pixel sizes, greater spatial resolution, and better bit depth, dot pitch, and luminance should have a positive influence on observers’ ability to detect subtle differences in lesion outline. However, this study demonstrated that trained and calibrated observers could recognize lesions of enamel regardless of the quality of the monitor used to display the image.15 Ludlow et al16 concluded that, even with the inclusion of a laptop display, there were no significant differences in monitor performance. A recent review article oncomputer display performance in dentistry suggests a need for further development of guidelines and standards for display of dental images, but it also indicated that there has been no conclusive proof that there are any advantages of medical-grade displays over standard displays in dentistry.17

Conditions in and around the dental operatory or clinic setting have also been considered important factors in viewing radiographic images, and radiology textbooks continue to recommend that ambient light in the viewing room be reduced.18 While some studies have reported that lighting conditions impact adequate detection of proximal incipient carious lesions,19 others have not determined that lighting conditions have a significant impact on lesion recognition.20 A 2006 study using both dental students and faculty in a dental school setting found that lighting conditions did not make a difference for student observers, but that ambient lighting did improve lesion recognition for faculty.21 While these studies suggest that it is optimal to use a room with reduced ambient lighting when performing a radiographic interpretation, in reality, dental practice workflow often precludes this. The inconclusive results of these studies would seem to indicate that when the dentist is unable to use ambient lighting to view digital images, it will likely not grossly hamper his or her diagnostic abilities when performing radiographic exams in fully lighted clinic settings such as those found in most dental operatories.

Image Storage, Retrieval, and Archiving

Management of radiographs once they are captured is critical to the long-term usefulness of the images for the dentist. In terms of storage, each intraoral digital image consumes between 100 and 250 kilobytes of space on acomputer hard drive. For a dental practice, this amounts to several gigabytes per year of needed space.22 Although the cost per megabyte of storage space has fallen, there is still a great demand for space due to the need to storecomplex radiographic images, high-resolution photographs, and other large documents.22 One solution is compression of the image. File sizes using compression algorithms with ratios as high as 1:16 can still maintain diagnostic accuracy for detection of proximal caries lesions, but reduces file sizes by 94%, as reported in a study by Pabla.22 A subsequent study using the same JPEG compression format found no significant differences in proximal caries recognition at a 1:12 ratio, which still provided a significant savings in storage space.23

A major advantage of digital radiographic technique in dentistry is the ability to review images that are many years old as a means of comparison with radiographs taken for recall appointments. Also important is the ability to review images that may have been taken in a different proprietary format for other practitioners. DICOM (digital imaging and communication in medicine) provides a specific standard for format, exchanging images, and associated information.24 DICOM is universally accepted in medicine, and widespread acceptance in dentistry will permit the reading of images from different digital imaging systems using the samecomputer.24 DICOM standards for intraoral digital image capture has be widely accepted, and models have been proposed for archiving analog film radiographs into a searchable digital database so that patient radiographic information can be easily shared with all treatment providers.25 The universal adoption of DICOM formatting in dentistry will be beneficial to patient treatment in that once images are captured, it will be possible to view them using any digital imaging system, thus streamlining the sharing of patient health information among practitioners.

Future of Intraoral Digital Imaging in Dentistry

There is currently little debate that intraoral digital imaging in dentistry is no longer an experimental technique. Direct digital imaging is becoming the universal and accepted standard for capturing dentistry’s mainstream diagnostic images—the periapical and the bitewing. The resolution of current sensors is diagnostically accurate, and the choice of system configurations rests on a determination of workflow needs and preferences. Detractors have suggested that conventional x-ray film outperforms digital radiographic technique in the detection of caries, but numerous studies have demonstrated that the capabilities of digital are equivalent to radiographic film. Additionally, many have questioned the need for high-end high-resolution monitors such as those used in medicine to accurately diagnose dental pathoses, when standardcomputer monitors have performed as well as high-end monitors for the detection of pathology. Also, standardization of digital file formats, storage, archiving, and sharing of images has allowed patient radiographs to be easily managed. Hardware, software, and many other aspects associated with digital imaging have been improved, and the costs have be reasonable.

Intraoral digital radiography will undoubtedly continue to be a viable technique for the practicing dentist. Of course, dentists will continue to rely on periapical and bitewing images for routine diagnosis of dental disease for the foreseeable future. However, technologies will likely continue to evolve, whether they use non-ionizing radiation or perhapscomplex imaging systems such as cone beam computed tomography (CBCT), in addition to producing panoramic, cephalometric, and tomographic views of the jaws. They may be able to produce periapical and bitewing images that are equivalent to current direct intraoral image capture.

Conclusion

Intraoral digital imaging has made a significant impact on the practice of dentistry. These techniques have lowered patient radiation dose, greatly increased the speed of image capture, eliminated the need for darkroom and processing chemicals, enhanced the practitioner’s ability to demonstrate pathology to the patient, and provided a means to make patient records accessible, portable, and secure. Dental digital intraoral radiography is a reliable, versatile, and cost-effective diagnostic aide for the practicing dentist.

About the Author

Robert A. Cederberg, MA, DDS
Associate Dean for Patient Care and Professor
Department of General Practice and Dental Public Health
University of Texas Health Science Center at Houston School of Dentistry
Houston, Texas

References

1. Farman AG, Levato CM, Gane D, Scarfe WC. In practice: how going digital will affect the dental office. J Am Dent Assoc. 2008;139 suppl:14S-19S.

2. Wenzel A, Møystad A. Work flow with digital intraoral radiography: a systematic review. Act Odontol Scand. 2010;68(2):106-114.

3. van der Stelt PF. Filmless imaging: the uses of digital radiography in dental practice. J Am Dent Assoc. 2005;136(10):1379-1387.

4. Matzen LH, Christensen J, Wenzel A. Patient discomfort and retakes in periapical examination of mandibular third molars using digital receptors and film. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2009;107(4):566-572.

5. Bin-Shuwaish M, Dennison JB, Yaman P, Neiva G. Estimation of clinical axial extension of Class II caries lesions with ultraspeed and digital radiographs: An in-vivo study. Oper Dent. 2008;33(6):613-621.

6. Bedard A, Davis TD, Angelopoulos C. Storage phosphor plates: how durable are they as a digital dental radiographic system? J Contemp Dent Pract. 2004;5(2):57-69.

7. Wenzel A. A review of dentists’ use of digital radiography and caries diagnosis with digital systems. Dentomaxillofac Radiol. 2006;35(5):307-314.

8. Alkurt MT, Peker I, Bala O, Altunkaynak B. In vitro comparison of four different dental X-ray films and direct digital radiography for proximal caries detection. Oper Dent. 2007;32(5):504-509.

9. Castro VM, Katz JO, Hardman PK, et al. In vitro comparison of conventional film and direct digital imaging in the detection of approximal caries. Dentomaxillofac Radiol. 2007;36(3):138-142.

10. Pontual AA, de Melo DP, de Almeida SM, et al. Comparison of digital systems and conventional dental film for the detection of approximal enamel caries. Dentomaxillofac Radiol. 2010;39(7):431-436.

11. Senel B, Kamburoglu K, Ucok O, et al. Diagnostic accuracy of different imaging modalities in detection of proximal caries. Dentomaxillofac Radiol. 2010;39(8):501-511.

12. Berkhout WE, Verhij JG, Syriopoulos K, et al. Detection of proximal caries with high-resolution and standard resolution digital radiographic systems. Dentomaxillofac Radiol. 2007;36(4):204-210.

13. Araki K, Matsuda Y, Seki K, Okano T. Effect ofcomputer assistance on observer performance of approximal caries diagnosis using intraoral digital radiography. Clin Oral Invest. 2010;14(3):319-325.

14. NEMA. Digital Imaging and Communications in Medicine (DI-COM) Part 14: Grayscale Standard Display Function. National Electrical Manufacturers Association standards and guidelines publications. 2007.

15. Cederberg RA, Frederiksen NL, Benson BW, Shulman JD. Influence of the digital image display monitor on observer performance. Dentomaxillofac Radiol. 1999;28(4):203-207.

16. Ludlow JB, Abreu M Jr. Performance of film, desktop monitor and laptop displays in caries detection. Dentomaxillofac Radiol. 1999;28(1):26-30.

17. Butt A, Mahoney M, Savage NW. The impact ofcomputer display performance on the quality of digital radiographs: a review. Aust Dent J. 2012;57 suppl 1:16-23.

18. White SC, Pharoah MJ. Oral Radiology Principles and Interpretation. 6th ed. St. Louis, MO: Mosby; 2009:256.

19. Arnold LV. The radiographic detection of initial carious lesions on the proximal surfaces of teeth Part II. The influence of viewing conditions. Oral Surg Oral Med Oral Pathol. 1987;64(2):232-240.

20. Cederberg RA, Frederiksen NL, Benson BW, Shulman JD. Effect of different background lighting conditions on diagnostic performance of digital and film images. Dentomaxillofac Radiol. 1998;27(5):293-297.

21. Kutcher MJ, Kalathingal S, Ludlow JB, et al. The effect of lighting conditions on caries interpretation with a laptopcomputer in a clinical setting. Oral Surg Ora Med Oral Pathol Oral Radiol Endod. 2006;102(4):537-543.

22. Pabla T, Ludlow JB, Tyndall DA, et al. Effect of data compression on proximal caries detection: observer performance with DenOptix photostimuable phosphor images. Dentomaxillofac Radiol. 2003;32(1):45-49.

23. Schulze RK, Richter A, d’Hoedt B. The effect of wavelet and discrete cosine transform compression of digital radiographs on the detection of subtle proximal caries. ROC analysis. Caries Res. 2008;42(5):334-339.

24. Farman AG. Use and implication of the DICOM standard in dentistry. Dent Clin North Am. 2002;46(3):565-573.

25. Decker JD, Bollen A, Chen CSK. A model for digital archiving of radiographs into a searchable database. Am J Orthod Dentofacial Orthop. 2007:132(6):856-859.

Take the Accredited CE Quiz:

LOGIN    or    SIGN UP
REDEEM A PROMO CODE
CREDITS: 2
COST: $16.00
PROVIDER: AEGIS Publications, LLC
SOURCE: Compendium of Continuing Education in Dentistry | October 2012

Learning Objectives:

  • describe the advantages and disadvantages between different types of digital image sensors
  • discuss the accuracy of digital imaging versus analog film for caries detection
  • understand the influence of acomputer monitor on image resolution
  • discuss image storage and archiving